I figured it was about time for another actual picture of our project. This photo really doesn't do the boat justice, but I wanted to show you something. Next time, I'll take the shot from the bow, and you'll get a better idea of the boat's overall shape and progress. (This shot makes the boat look more like a giant brick than an actual watercraft.)
What you should notice in this picture is just how sharp we've cut the chines, how flat the boat is, and how patchy the boat looks now. (If you click on the picture, you will see a larger picture, complete with notes on the boat.)
Along the chines, you will see something that looks a little like mold. Greg did a fog coat of black spraypaint. The idea here is to do a very light hand sanding with a long sanding block. After this sanding, we will be able to identify the low spots. These low spots will be easily seen because the fog coat of black spraypaint will remain in the low areas, whereas the paint will have been sanded from the higher areas.
Feel free to click here if you'd like an idea of how things looked before we built up the chines.
Subscribe to:
Post Comments (Atom)
5 comments:
I don't know what kind of paint, etc. we're going to use, but I'll check with Greg.
We notched the stringers and are using temporary frame pieces while the hull is updside down.
One thing we did that you may want to not do, is gluing the first stringer peice to the rest of the stringer. That statement may not make a lot of sense now, but if you look at my March 2005 through May 2005 archives, it will make more sense.
That fairing job's looking good! Have you been using the 'fog coat' technique everywhere or only on the chines?
I'll be moving into the "fairing phase" myself and am looking for tips to make it as pain-free as possible...
Keep up the good work!
Cheers,
A.
Andrew: In the early stages, the high and low spots were relatively obvious. We have done the fog coat technique in one or two other areas and it seems to work.
Looks good! Is that view looking across the transom?
I took the picture from the rear transom facing toward the bow.
Post a Comment