When I said that it had been over three weeks since we'd accomplished anything on the boat, I wasn't completely accurate. I did go over to Greg's place last weekend, and we did the finishing touches on the frame, and test-fitted the bottom hull pieces. As you see in the photo, the hull pieces are too long. They're also a little too wide, and the rear transom is a little too wide, so we're going to have to do a little trimming before we can zip-tie the hull and start glassing the boat.
For a closer look at the overlaps I'm talking about, you can click here for a close-up of the front transom/hull overlap. This link will give a closer view of the overlap along the sides, and this link will give you a better idea of how far off the rear transom is.
1 comment:
Hi thannks for sharing this
Post a Comment